Phone
+41 41 630 44 70
Fax
+41 41 630 44 71
Address
Lättichstrasse 6,
6340 Baar,
Switzerland
The Marchetti Sherpina CW 25.35 is a very compact telescopic crawler crane of the 25 ton (t) class, which has a 5-piece set telescopic boom with a total length of 25.1 meters (m). The boom length can also be adjusted under partial load. The maximum length of the system can be extended with the optional lattice top (JIB) up to 33.2 m.
The engine of the Marchetti Sherpina CW 25.35 is compliant to the new Tier 4 standard, therefore in Switzerland, no additional and expensive aftermarket filters have to be installed.
For this crawler, various options are availalbe making it a multi purpose working tool.
Technical data at a glance:
| Max capacity: | 25 t / 57.8 metric tons (mt) |
| Boom lenght: | 25.1 m |
| Max hight from ground w/o JIB: | 28.1 m |
| Boom lenght with JIB: | 33.2 m |
| Max speed: | 2.8 km/h |
Contact us for more details or have a look at the Brochure Sherpina CW 25.35.
The Marchetti Sherpa CW 70.42 L is a telescopic crawler crane of the 70 ton (t) class, which has a 5-piece set telescopic boom with a total length of 42 meters (m). The boom length can be adjusted also under partial load. The maximum length of the system can be extended with the optional lattice top (JIB) up to 56.5 meters.
As a speciality, this crawler is equipped with outriggers. The crane can be operated with or without outriggers. However, by operationg it with outriggers, the capacity is + 200 % compared to when it is operated just on it's crawlers.
The support base needed by operating the crawler with outriggers is just 6.72 m x 6.72 m. Partial stabilization charts are available as well.
The engine of the Marchetti Sherpa CW 70.42 L is compliant to the new Tier 4 regulation. Therefore the crawler can be operated in Switzerland without the need of adding an expensive aftermarket filter.
Technical data at a glance:
| Max capacity: | 70 t |
| Boom lenght: | 42 m |
| Max hight from ground w/o JIB: | 48.5 m |
| Boom lenght with JIB: | 56.5 m |
| Max speed: | 2.4 km/h |
| Max support base: | 6.72 m x 6.72 m |
Contact us for more details or have a look at the Brochure Sherpa CW 70.42 L EN.
The Marchetti MTK40 is a telescopic crane of the 40 ton (t) class.
The Marchetti MTK40 features a 4-part telescopic boom with a total length of 32 meters. The maximum length of the system can be extended with the optional lattice top (JIB) to 46.5 meters (m).
The "little brother" of the MTK60, through the motor of the chassis, is operated as an auxiliary, as it doesn't have its own crane motor. Thus, it is possible to comply with the maximum permissible gross weight and at the same time it has enough ballast for the required payloads.
The necessary support base with fully extended outriggers is 6 x 6.2 m or, with the out riggers extended only 50 %, 3 m x 3.1 m. Therefore, this device can be positioned much closer than a loading crane at the site of a suspended load. Hence, it can handle higher payloads than normally can be achieved with a loading crane.
The MTK40 is offered in Germany on a standard 3-axle truck chassis. In Switzerland, it is necessary to use a 4-axle chassis for the MTK40 as a result of the regulatory requirements.
Many variations are available to the customer regarding the choice of the truck chassis. The vehicle can be optimally integrated into an existing fleet. The maintenance and operating costs are kept low and necessary support work is more efficient.
The MTK40 mounted telescopic crane lifts your loads with high precision thanks to a genuine telescopic boom. It moves fully loaded and is like a truck on the road, so it can be on site, ready to go very fast. Thus, the MTK40 represents the perfect taxi crane.
Contact us for more details.
Marchetti Autogru S.p.A. was founded in 1956 by Luigi Marchetti in Piacenza in northern Italy. Today, the company is run by second generation Matteo Marchetti.
With over 60 years of experience in the development and manufacture of mobile cranes, the family-owned company today stands for high-quality and extremely robust cranes. Marchetti has always managed to adapt to changing market needs and has brought innovative products to the market, such as the Trio or Sherpa. Since its founding, over 2'500 cranes of various designs have been manufactured and sold all over the world.
Today more than 90 people work at Marchetti in development and production at its site in Piacenza, Italy, about 30 minutes from Milan. The product portfolio includes crawler cranes and construction telescopic cranes from 30 to over 70 tons lift capacity. Marchetti has a worldwide dealer and service network with a special focus on Europe, Asia and the Gulf States.
CRANTEC AG is exclusive dealer for Marchetti cranes in Switzerland, Germany and Austria.
We are proud to be part of the Marchetti family. Satisfy yourself of the down-to-Earth quality and the very good price-performance ratio of Marchetti products.
The Marchetti MTK60 is a telescopic crane of the 60 ton (t) class, which has a 5-piece set telescopic boom with a total length of 40 meters. The maximum length of the system can be extended with the optional lattice top (JIB) up to 54.5 meters (m).
The Marchetti MTK60 has a self-contained crane engine, which is designed to the specific requirements of crane operation. The necessary support base for the achievement of very good competitive compared payloads is just 7.1 m x 7.35 m respectively, with outriggers extended only to 50 %, 3, 5 m x 3.7 m.
The device can be positioned much closer than a loading crane at the site of a suspended load. Therefore, generally higher payloads can be achieved than with a loading crane.
A commercial truck chassis is used as a base. The customer can select the brand of the chassis itself. Only a few parameters must be met so that the construction works. We recommend, however, that the customer rely on a tried and true chassis configured by us.
The result combines the best of two worlds with this device:
- problem-free integration in the existing vehicle fleet and to 80 % reduced maintenance and operating costs as compared to the AT crane as well as
- high lifting capacities and very precise crane operation thanks to the true telescopic boom and ballast of the crane.
In Switzerland, the MTK60 is offered in a customized and powerful configuration and is therefore called the "MTK60+ swissedition".
In this stronger Swiss configuration, the mounted telescopic crane has 11 tons of crane ballast which can be upgraded independently. The vehicle can be moved with this 11 ton ballast without heavy vehicle charge duty. Therefore, the Marchetti MTK60+ swissedition is the perfect taxi crane. Move up to 80 km/h at the job site, thanks to completely autonomous loading it is soon ready for work and after the job you are just as quickly away.
Contact us for more details.
CRANTEC AG and Hodel Betriebe AG are cooperating in the area of warranty and service work as well as the supply of spare parts for Marchetti cranes.
Since 2017 the customers of CRANTEC AG have had a competent partner at their side, be it in the field of periodic crane testing, maintenance or repair. Because Hodel Betriebe AG maintains an extensive spare parts warehouse and is represented throughout Switzerland with service centres and mobile service vehicles, Marchetti customers can count on any problems being solved efficiently.
"There is not much to do, however, we want to be on the safe side," says Bernhard Vogel, Managing Director of CRANTEC AG. "The quality of Marchetti cranes and their simple and proven design and operation are reflected in virtually no warranty claims. The devices are just functioning! However, we are repeatedly approached on this subject and want to offer our customers a solid solution."
Read the interview with Jörg Hodel (owner of Hodel Betriebe AG, Grosswangen) and Bernhard Vogel (owner of CRANTEC AG, Baar) about the reasons that led the two companies towards this new partnership.
Pictures
.jpg)
.jpg)
.jpg)
.JPG)
.JPG)
.JPG)
.JPG)
Menu
Visit Us
Lättichstrasse 6,
6340 Baar,
Switzerland
Contact us
Copyright © 2024 Crantec